>技术资料

螺丝标准及国标德标国际标准对应表
中文品名 德国标准 中国标准 国际标准 英文品名
自攻自钻螺钉多种头型 DIN7504 GB15856.1-4   Self-drilling tapping screws
平垫 DIN125-A GB97.1-85 ISO7089 Plain washers
平垫(带倒角) DIN125-B GB97.2-85 ISO7090 Mediun washers
平垫 DIN126   ISO7091 Plain washers
重型弹垫 DIN127-A GB7244   Spring lock washers,tang ends
标准弹垫 DIN127-B GB93-87   Spring lock washers,square ends
内六角扳手 DIN911   ISO2936 Socket wrenches
内六角圆柱头螺钉 DIN912 GB70-85 ISO4762 Hexagon socket cap screws
内六角平端紧定螺钉 DIN913 GB77-85 ISO4026 Hexagon socket set screws with falt point
内六角尖端紧定螺钉 DIN914 GB78-85 ISO4027 Hexagon socket set screws with cone point
内六角圆柱端紧定螺钉 DIN915 GB79-85 ISO4028 Hexagon socket set screws with dog point
内六角凹端紧定螺钉 DIN916 GB80-85 ISO4029 Hexagon socket set screws with cup point
六角头螺栓)(半牙) DIN931 GB5782-86 ISO4014 Hexagon head screws
六角头螺栓(全牙) DIN933 GB5783-86 ISO4017 Hexagon head screws
开槽沉头螺钉 DIN963 GB68-85 ISO2009 Slotted countersund head screws
开槽半沉头螺钉 DIN964 GB69-85 ISO2010 Slotted raised countersunk oval head screws
十字槽沉头螺钉 DIN965 GB819-85 ISO7046 Cross recessed countersunk head screws
十字槽半沉头螺钉 DIN966 GB820-85 ISO7047 Cross recessed raised
十字槽盘头自攻螺攻 DIN7981 GB845-85 ISO7049 Pan head tapping screws with cross recessed
十字槽沉头自攻螺攻 DIN7982 GB846-85 ISO7050 Countersunk flat head tapping screws with cross recessed
十字槽半沉头自攻螺攻 DIN7983 GB847-86 ISO7051 Raised countersunk oval head tapping screws with cross
开槽盘头自攻螺钉 DIN7971 GB5282-85 ISO1481 Pan head tapping screws with slot
开槽沉头自攻螺钉 DIN7972 GB5283-85 ISO1482 countersunk flat head tapping screws with slot
开槽半沉头自攻螺钉 DIN7973 GB5284-85 ISO1483 Raised sountersunk oval head tapping screws with slot
六角头自攻螺钉 DIN7976 GB5285-85 ISO1479 Hexagon tapping screws
十字槽盘头螺钉 DIN7985 GB818-85 ISO7045 Pan head screws with cross recessed
内六角沉头螺钉 DIN7991   ISO10642 Hexagon socket coutersunk head screws
六角头尼龙锁紧螺母 DIN982 GB812-88 ISO2982 Prevailing rorque type hexagon nuts,heavy type,with nylon
六角头薄型尼龙锁紧螺母 DIN985 GB889.1-86 ISO7040 Prevalling torque type hoxagon nuts,heavy type,with nylon
六角盖型尼龙锁紧螺母 DIN986 GB6172.2-86 ISO10511 Preailling torque typedomed capnuts with nylon insert
六角头螺母( 1 型) DIN934 GB6170-86 ISO4032 Hexagon full nuts
细牙六角头螺母( 1 型) DIN934 GB6171-86 ISO8673 Hexagon full nuts
六角头薄螺母 DIN936 GB6172.1-86 ISO4035 Hexagon thin nuts
六角薄螺母 DIN439 GB6172-86 ISO4035 Hexagon thin nuts
开槽半沉头木螺钉 DIN95 GB101   Slotted raised csk head wood screws
开槽半圆头木螺钉 DIN96 GB99   Slotted round head wood screws
开槽沉头木螺钉 DIN97 GB100   Slotted countersunk head wood screws
鞍形弹垫 DIN128-A GB7245-87   Single coil spring lock washers
弹簧止动垫圈 DIN137-A     Curved spring washers
波形弹垫 DIN137-B GB955   Wave spring washers
T 型方颈螺栓 DIN186 GB37-88   T-head blots with square neck
T 型双接头螺栓 DIN188     T-head bolts with double nip
螺纹圆锥销 DIN258   ISO8737 Taper pins with threaded end
T 型头螺栓 DIN261     T-head bolts
蝶型螺母(美制) DIN315AF     Wing nuts America form
蝶型螺母(德制) DIN315DF GB62-88   Wing nuts germany form
蝶型螺母(美制) DIN316AF     Wing screws America form
蝶型螺母(德制) DIN317DF     Wing screws germany form
圆球型盖型螺母 DIN319     Ball knobs
开槽带孔球面圆柱头蚴钉 DIN404 GB832-88   Slotted capstan screws
开槽长圆柱端紧定螺钉 DIN417 GB75-85 ISO7435 Slotted set srews with full dog point
开槽平端紧定螺钉(半牙) DIN427 GB73-85 ISO2342 Slotted set srews with chamfered end
小六角特薄细牙螺母 DIN431 GB808-88   Pip nuts with thread
外舌止动垫圈 DIN432 GB856-88   External tap
小垫圈(用于圆柱头螺钉) DIN433 GB848-95 ISO7092 Washers for cheese head screws
方斜垫圈( U 型) DIN434 GB852-88   Square taper washers for
方斜垫圈( I 型) DIN435 GB852-88   Square taper washers for
方垫圈 DIN436     Square washers
开槽凹端紧定螺钉 DIN438 GB74-85 ISO7436 Slotted set with cup point
细牙六角薄螺母 DIN439 GB6173-86 ISO8675 Hexagon thin nuts
木螺钉专用垫圈 DIN440   ISO7094 Rounds washers for wood constructions
密封帽 DIN443     Sealing caps,push-in type
活节螺栓 B DIN444 GB798-88   Eye bolts form B
内舌止动垫圈 DIN462     Internal tab washers
双耳止动垫圈 DIN463 GB855-88   Washers with two taps
滚花高头螺钉 DIN464 GB834-88   Knurled thumb screws with collar
开槽滚花高头螺钉 DIN465     Slotted knurled thumb screws with collar
滚花高螺母 DIN466 GB806-88   Knurled thumb nuts with collar
滚花薄螺母 DIN467 GB807-88   Knurled thumb thin nuts
锁紧垫圈 DIN470     Sealing washers
轴用弹性垫圈 DIN471 GB893-86   Retaining rings for shafts(external),circlips
孔用弹性垫圈 DIN472 GB893.86   Retaining rings for bores(internal),circlips
方头带垫螺栓 DIN478     Square head bolts with collar
方头圆柱底端螺栓 DIN479     Square head bolts with half dog point
方头带垫关圆底端螺栓 DIN480     Square head bolts with collar,half dog point
T 型槽螺母 DIN508   ISO299 T-slot nuts
单头螺柱 DIN525     Single end studs
地脚螺栓 DIN529 GB799-88   Masonry bolts
带槽圆螺母 DIN546 GB817-76   Slotted round nuts
端面带孔圆螺母 DIN547 GB815-88   Round nuts with drilled holes in one face
开槽平端紧定螺钉 DIN551 GB73-85 ISO4776 Slotted set screws with flat point
开槽锥端紧定螺钉 DIN553 GB71-85 ISO7434 Slotted set screws with cone point
六角螺母 DIN555   ISO4034 Hexagon nuts
方螺母 -C DIN557 GB39-88   Square nuts
六角头螺钉 DIN558   ISO4018 Hexagon screws
六角头圆柱端紧定螺钉 DIN561     Hexagon set screws with full dog point
薄型方螺母 -B DIN562     Square nuts without bevel
六角头木螺钉 DIN571 GB102-86   Hexgon head wood screw
吊环螺钉 DIN580 GB825-76 ISO3266 Lifting eye bolts
吊环螺母 DIN582     Lifting eye nuts
六角头螺栓 DIN601   ISO4016 Hexagon blots
大半圆头方颈螺栓(马车螺栓) DIN603 GB14-88 ISO8677 Mushroom head square neck bolts(carriage bolts)
沉头带插销马车螺栓 DIN604     Flat countersunk nib bolts
沉头长方颈马车螺栓 DIN605     Flat countersunk long squareneck bolts
半圆头带插销马车螺栓 DIN607     Cup head nib bolts
沉头短方颈马车螺栓 DIN608     Flat countersunk short square neck bolts
六角头精配螺栓(长螺纹) DIN609     Hexagon fitted bolts,long thread
六角头精配螺栓(短螺栓) DIN610     Hexagon fitted bolts short thread
滚花平头螺钉 DIN653 GB835-88   Knurled thumb screws thin type
半圆头铆钉 DIN660 GB867-86 ISO1051 Round head rivets
沉头铆钉 DIN661 GB869-86 ISO1051 Contersunk head rivets
沉头铆钉 DIN662   ISO1051 Raised contersunk head rivets
大扁头铆钉 DIN674   ISO1051 Mushroom head rivets
重型侧面带孔圆螺母 DIN703     Adjusting rings,heavy range(shafting collars)
侧面带孔圆螺母 DIN705 GB816-88   Adjusting rings,light range(shafting collars)
卡头 DIN741     Wire rope clips
T 型槽螺钉 DIN787   ISO299 T-slot screws
双头螺柱(牙长 =2D ) DIN835 GB900-88   Studs-metal(end=2d)
内六角锥型闭锁螺钉 DIN906     Hexagon socket pipe plugs,conical thread
内六角直型闭锁螺钉 DIN908     Thread
外六角锥型闭锁螺钉 DIN909     Thread
外六角直型闭锁螺钉 DIN910     Hexagon head screw plugs,cyl.thread
薄型盲螺母 DIN917     Hexagon cap nuts
开槽小圆柱头螺钉 DIN920     Slotted short cheese head screws
开槽大圆柱头螺钉 DIN921 GB838-88   Slotted large cheese head screws
开槽圆柱头轴肩螺钉 DIN923 GB830-88   Slotted pan head screw with shoulder
开槽无头轴肩螺钉 DIN927     Slotted shoulder screws
焊接方螺母 DIN928 GB/T13680-92   Square weld nuts
焊接六角螺母 DIN929 GB/T13681-92   Hexagon weld nuts
六角头螺母 DIN970     Hexagon nuts type-1
六角头螺母 DIN971     Hexagon nuts type-2
细牙六角头螺母( 2 型) DIN972     Hexagon nuts with fine thread
开槽六角螺母 DIN935 GB6178-86 ISO7035 Hexagon slotted and castle nuts
六角头开槽薄螺母 DIN937 GB6181-86 ISO7038 Hexagon thin slotted and caslte nuts
双头螺距(牙长 =1D ) DIN938 GB897-88   Studs metal(end=1d)
双头螺距(牙长 =1.5D  DIN939 GB898-88   Studs metal(end=1.25d)
双头螺距(牙长 =1.25D  DIN940     Studs metal(end=1.5d)
六角头细牙螺栓(全牙) DIN960 GB5785-86 ISO8765 Hexagon head bolts,metric fine pitch thread
六角头细牙螺栓(半牙) DIN961 GB8786-86 ISO8676 Hexagon head bolts,metric fine pitch thread
头部穿孔六角头螺栓 DIN962     Additional shapes and versions for bolts
牙条(全螺纹) DIN975 GB6176-86 ISO8674 Threaded rods(studdings)
螺纹销 DIN976 GB15389-94   Threaded pins(stud bolts)
六角头开槽薄螺母2 DIN979     Hexagon thin slotted and castle nuts
全金属六角锁紧螺母 1 DIN980     Prevaillng rorque type hexagon nuts,all metal nuts
圆螺母 DIN981 GB6184-86 ISO7199 Locknuts
配合垫片 DIN988     Shim rings
木材连接用垫片 DIN1052     Washers for timber connectors
沉头钢钉 DIN1151     Round plain head nails
销钉专用垫片 A DIN1440   ISO8738 Plain washers for clevis pins(A )
销钉专用垫片 DIN1441     Plain washers for clevis pins
带头销钉 DIN1444   ISO2341 Clevis pins with head
圆锥型槽销 DIN1471 GB/T13829.2 ISO8744 Grooved pins,taper grooved
圆锥型槽销(半槽) DIN1472 GB/T13829.2 ISO8745 Grooved pins,taper grooved half length
平行槽销(带倒角) DIN1473   ISO8740 Grooved pins,parallel grooved full length
前端凹槽槽销 DIN1474   ISO8741 Grooved pins,reverve grooved half length
中部凹槽槽销 DIN1475   ISO8742 Grooved pins,center grooved
圆头槽销 DIN1476   ISO8746 Grooved pins with round head
沉头槽销 DIN1477   ISO8747 Grooved pins with countersunk head
六角螺母棒 DIN1479     Turnuckles(center parts),made out of hexagon bar
花蓝螺栓 DIN1480     Turnuckles with eye bolt and hook bolt
弹性圆柱销 DIN1481 GB879-86 ISO8752 Spring pins,heavy type
组合式盖型螺母 DIN1587 GB802-88   Hexagon domed cap nuts
开槽圆螺母(配合沟头扳手) DIN1804     Slotted round nuts for hook spammer
圆螺母(带插销孔) DIN1816     Round nuts with set holes
盘型弹簧垫圈 DIN2093     Disc springs
喉箍 DIN3017     Hose clamps
润滑油嘴(旋扭头) DIN3404     Lubricating nipples,button head
管夹 DIN3567     Shackles for conduilts
U 型螺栓 DIN3570     Stirrup bolts(U-bolts)
球面垫圈 DIN6319 GB849-88   Spherical washers,conical seats
圆柱销 DIN6325   ISO8734 Parallel pins
厚六角螺母 DIN6330 GB56-88   Hexagon nuts,1.5d
厚六角法兰面螺母 DIN6331 GB6177-86   Hexagon nuts,1.5d with collar
长六角螺母 DIN6334     Hexagon nuts,3d
外齿锁紧垫圈 DIN6797-A GB862.1-87   External teeth lock washers
内齿锁紧垫圈 DIN6797-I GB861.1-87   Internal teeth lock washers
外锯齿锁紧垫圈 DIN6798-A GB862.2-87   External teeth serrated lock washers
内锯齿锁紧垫圈 DIN6798-I GB861.2-87   Internal teeth serrated lock washers
开口挡圈 DIN6799 GB896-76   Retaining rings for shafts(E-rings),circlips
平键( A 型) DIN6885   ISO773/2491 Parallel keys(form A)
半圆键 DIN6888   ISO3912 Woodruff keys
嵌环(支撑环) DIN6899     Thimbles
机器螺钉和垫圈组合件 DIN6900     Screws and washers assemblies
自攻螺钉和垫圈组合件 DIN6901 GB9074.1-17   Tapping screws and washer assemblies
薄型带孔内六角圆柱螺钉 DIN6912 GB9074.18-23   Hexagon cocket head cap screws with hole,low head
大六角头螺栓 DIN6914     Hexagon head bolts with large head
大六角螺母 DIN6915     Hexagon nuts with large wideth across flat
大垫圈 DIN6916     Round washers for friction grip bolts
楔型方垫圈 DIN6917     Spuare taper washers for friction grip bolts on T-
六角法兰面螺母 DIN6923 GB6187-86 ISO4161 Hexagon flange nuts
全金属六角锁紧螺母 2 DIN6925 GB6185.1-2000 ISO7042 Prevailing torque type hexagon nuts,all metallic nuts
轻型弹性圆柱销 DIN7346   ISO13337 Spring pins,light type
重型弹性圆柱销用垫圈 DIN7349     Washers for bolts with heavy type spring pinss
ISO 公制螺纹螺钉多种头型 DIN7500     Thread forming screws for ISO-metric thread
开槽切削螺纹螺钉(多种头型) DIN7513     Thread cutting screws
十字槽切削螺纹螺钉(多种头型) DIN7516     Thread cutting screws cross recess
T 型四爪螺母 DIN7965     Tee nuts with pronge
钢结构用六角头螺栓连接副 DIN7968 GB1228/1229/1230   Hexagon head fitted bolts for steel structures
圆柱头螺钉用弹簧垫圈 DIN7980   ISO8738 Spring lock washers for screws with cylindrical heads
薄型内六角圆柱头螺钉 DIN7984     Hexagon socket head cap screws with,reduced head
钢结构用垫圈 DIN7989 GB1230-84   Washers for steel structures
钢结构用六角头螺栓 DIN7990 GB1229-84   Hexagon head bolts for steel structures
轴用钢丝挡圈 DIN7993 GB895.2-86   Roundwire snap rings for shafts
十字槽半沉头木螺钉 DIN7995 GB952-86   Cross recessed raised countersunk head wood screws
十字槽圆头木螺钉 DIN7996 GB950-86   Cross recessed round head wood screws
十字槽沉头木螺钉 DIN7997 GB951-86   Cross recessed countersunk head wood screws
螺纹护套(普通、自锁等) DIN8140     Ciol inserts,coarse,fine thread,silf locking
大外径垫圈 DIN9021 GB96-85 ISO7093 Washers,outside diameter appro.3d
弹簧卡子 DIN11024     sping cotter for a bolt
平板螺栓 DIN13257     Belting bolts(elevator bolts)
干壁钉(墙板钉) DIN18182     Dry wall screws
环型螺母 DIN28129 GB63-88   Lifting nuts(eye nuts)
圆螺母用止退 DIN70952     Tab washer for slotted round nuts
圆锥销 DIN1 GB117 ISO2339 Taper pins
圆柱销 DIN7 GB119-86 ISO2339 Parallel pins
开槽圆柱头螺钉 DIN84 GB65-85 ISO1207 Slotted cheese head screws
开槽盘头螺钉 DIN85 GB67-85 ISO1580 Slotted pan head screws
单耳止动垫圈 DIN93 GB854   Tab washers
开口销 DIN94 GB91 ISO1234 Split cooter pins

 

 

Copyright 新易扣精密科技(苏州)有限公司 All Right Reserved
电话:18912771061,0512-69355261 传真:0512-69355262 邮箱:zj@316s.net
地址:苏州市常熟市辛庄镇新阳大道156号创晋产业园23-1栋 ICP备案:苏ICP备15046668号
专业生产-铜螺母 铜嵌件 压铆螺母 压铆螺钉 六角隔离柱 精密车削件